WHAT'S IN THE BUNDLE:
- 10 - Carbon Steel Black Oxide Coated 12.9 Class Metric Screws
- 5 - Carbon Steel Black Oxide Coated Grip Pins
- 2 - 2.5mm hex keys
KEL-TEC SUB-2000 Carbon Steel Grip Pins & Screws Upgrade Bundle
Enhance the durability and performance of your KEL-TEC SUB-2000 with this Carbon Steel Upgrade Bundle. Designed to directly replace the factory alloy screws and aluminum grip pins, this kit offers a notable upgrade in terms of strength and resistance to wear. Suitable for both Gen 1 and Gen 2 models of the SUB-2000, these components are pivotal for reinforcing the polymer trigger grips.
The upgraded carbon steel screws in this bundle are of a superior grade, finished with a black oxide coating. This ensures not only resistance to corrosion but also protection against thread galling. They perfectly pair with the included carbon steel grip pins, offering an enhanced, firm grip.
Stripping of the stock aluminum grip pins can be an issue, but these Carbon Steel Grip Pins address this concern head-on. They are designed to match the strength and finish of the KEL TEC SUB 2000 Screw Upgrade Kit, ensuring consistent performance. If you've experienced screws not backing out properly with the stock pins, this bundle provides the solution.
Aesthetically, the M*CARBO Carbon Steel Grip Pins are finished with a black oxide coating, offering rust resistance and a matching shade for your SUB-2000. Unlike the reflective finish of the stock grip pin seen on the rear iron sight hinge pin, these grip pins provide a seamless appearance.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Carbon Steel Grip Pins & Screws Upgrade Bundle, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Carbon Steel Grip Pins & Screws Upgrade Bundle has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Carbon Steel Grip Pins & Screws Upgrade Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Why I support Mcarbo:
1. They are Combat Veteran owned.
2. They support the Military/LEO’s (I was both)
3. Their components are Detail Engineered
4. Exceptional QUALITY
5. Customer Service is A+++
6. They offer ”How To” detailed videos for most components
7. Fast shipping and Outstanding order communications
Note: Basically I rebuilt my Kel Tec sub 2000, Gen 2
I have installed the hammer bushing pin; the screw and pin set and the feed ramp in my sub 2k. I did all the install myself, and the little carbine works perfect! Thanx for the fine products !! Also, your videos are very helpful!! Thanx so much.
randytraktors
Logan Co. Arkansas
KEL-TEC SUB-2000 Carbon Steel Grip Pins & Screws Upgrade Bundle
I installed this on my sub-2000 40 cal and it does make things much better.
would I buy it again yes.
I just picked up the sub-2000 9mm
great
upgrading all my pins n screws has made this weapon a much more secure machine...thanx
Excellent
First off I cannot say enough good things about M-Carbo ; very fast shipping, great staff and attentive to the needs of their customers. I upgraded my Sub2000 Multi-Mag to the Glock version as well as most of the internal parts including this one. M-Carbo is hands down the best source of aftermarket parts for your Sub2000 that I have been able to find online ; even better than Kel-Tec themselves
These are an absolute MUST!!!
If you crack open your Sub 2000 even once, you will likely have problems with the OEM aluminum pins. These are so much better than the OEM parts. Thanks Mcarbo.
This was a game changer
So I bought many upgrades but at separate times like a dope. Reassembling the rifle after buying these pins made it a thousand times easier. The spring stopped “slipping” behind the pin with mcarbos pin kit. The screws where a nice upgrade as well.
4 Aces ♤♡◇♧
The scew kit upgrade was excellent, a perfect fit with quality materials. The tutorial video was top notch and expertly presented... A side note though, when installing the screws, if you square the screw up and gently then turn it counter clockwise, you will hear a click when the leading threads drop off one another and it's at that point you know you are perfectly lined up. Actually, this works with any nut and bolt. This keeps you from cross threading it...