WHAT'S IN THE KIT:
- 1 - Custom Hammer Spring
- 1 - Custom Sear Spring
- 2 - Custom Disconnector Springs
- 1 - Custom Trigger Return Spring
Marlin 795 Trigger Spring Kit
Upgrade the trigger of your Marlin rifle with the Marlin 795 Trigger Spring Kit / Marlin 70 & Marlin 995 Trigger Spring Kit. This kit will reduce your trigger pull from a factory weight of ~6.75lbs to a modified weight of ~4.5lbs, resulting in a 20% trigger pull reduction. Improve your accuracy and overall rifle performance with this kit that includes a custom hammer spring, sear spring, disconnector spring, and trigger return spring.
This Marlin trigger spring kit is made of the highest quality spring steel available in the USA, including ASTM A228 music wire and 302 stainless steel spring wire. The MCARBO springs will tighten your shot groups and reduce malfunctions, thanks to their construction with the highest quality materials.
This kit will work for all Marlin 795, Marlin 70, and Marlin 995 variations, and the installation takes only 20-30 minutes. Upgrade your Marlin rifle with this Marlin 795 Trigger Spring Kit / Marlin 70 & Marlin 995 Trigger Spring Kit for a smoother, more precise shooting experience.
*M*CARBO always includes an extra disconnector spring in this spring kit because the disconnector spring requires bending during the install process. Just in case you don't bend it properly, M*CARBO has you covered with a spare.*
Marlin 795 Resources
If you're getting the Marlin 795 Trigger Spring Kit, then you might find the following Marlin 795 Resources useful in further enhancing your firearm. Download the Marlin 795 Owners Manual or use the Exploded View of the Marlin 795 Parts Diagram to plan your next firearm project.
Drop Tested and Approved:
Marlin 795 Trigger Spring Kit / Marlin 70 & Marlin 995 Trigger Spring Kit is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The Marlin 795 Trigger Spring Kit / Marlin 70 & Marlin 995 Trigger Spring Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Marlin 795 Trigger Spring Kit / Marlin 70 & Marlin 995 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Marlin 795 trigger spring kit
I was very happy with the speed of shipping and the overall quality of the springs in the kit. It's very helpful to watch the install videos along with a good polishing of pivot points. This is an excellent company to deal with and no way could I have reduced the pull weight to what I ended up with without them. A stoning of the sear and hammer helped too.
Great value
This spring kit is a great value. Both in time spent installing it and purchase price. The installation video made it VERY easy to install and the results do not disappoint. I do not have a trigger scale but it is definitely a substantial improvement over stock. This spring kit pairs very well with the parts available from DIProducts to make for a huge improvement to my Marlin 795.
My 1967 marlin glenfield
My model 70 was having function issues, cleaning didn't help, I replaced all the springs from this kit plus the recoil spring. I bought a pack of the little e-clips as well. You never know if you will lose one. Anyway the Old 1967 made marlin functions good as new again... I highly recommend watching the install video, at least a few times
Inexpensive but effective product
After about 3500 rds., my Marlin 795 began having light primer strikes. Half the rds. fired would require a second firing pin strike to ignite, so I purchased this kit and problem solved.
Mcarbo's instructional installation video is most helpful. This is the second product I have purchased from Mcarbo and both are functional yet inexpensive fixes for firearms. I highly recommend them. Thank u Mcarbo!
As advertised….Now have crisp trigger
Great product. Improvement is very noticeable. Video of installation was so helpful.
Marlin 795
Added this spring kit to my Marlin 795 and I love it. Much lighter and smoother trigger pull which improved my accuracy. I recomend this product
M-70 update
Hammer spring to stiff. First review stated would not fire after cycling first round fired. I removed new hammer spring and reinstalled old spring. Popped off couple of rounds with no issues. I believe in my rifle a 1980 model 70, all these new springs including a hyper velocity recoil spring was too much tension to cycle properly say to stiff. Works fine now,trigger is improved.
Chris Taylor.
Ocean Park Washington
Hated Marlin 995 6# trigger, super safe for kids and mile of creep
As stated by McCarbo, now avg 4lbs, now want 2-3# as I shoot semi competitively @ bench and occasional rabbit if it gets too close to the garden or raccoons when after the dog food. I also watched an intelligent experienced gent work on the sear. I very cautiously followed his instructions and creep is gone.
Will this work on a Marlin 989G? Thanks
Will the Marlin 795 kit work in my Marlin Papoose?
Yes, it will work in your Marlin 70PSS Papoose
Will this kit work on my Marlin Model 717M2?
Yes it will also reduce the trigger pull on the Marlin Model 717M2.