WHAT'S IN THE KIT:
- 10 - Carbon Steel Black Oxide Coated 12.9 Class Metric Screws
KEL-TEC SUB-2000 Carbon Steel Screw Upgrade Kit
Upgrade your KEL-TEC SUB-2000 by replacing its stock trigger assembly alloy screws with our high-quality Carbon Steel Screw Kit. Our screws are a higher grade and come with a black oxide coating for enhanced corrosion resistance and protection against galling or thread stripping.
This Screw Upgrade Kit is designed to seamlessly replace the factory lower-grade alloy screws. It's ideally suited for Gen 2 models of the SUB-2000. For Gen 1 models, compatibility is ensured when paired with our Upgraded Carbon Steel Grip Pins—a highly recommended modification to enhance the longevity of your firearm.
Our screw kit comprises 12.9 class metric screws, all finished with a premium black oxide coating. They are designed as the optimal replacements for your trigger assembly, ensuring the most secure fit for your KEL-TEC SUB-2000. Recommended torque for installation is 15 in/lbs.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Carbon Steel Screw Upgrade Kit, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Carbon Steel Screw Upgrade Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Carbon Steel Screw Upgrade Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Absolute must upgrade
What a great upgrade. it’s just a beginning. I plan on getting the rest of the upgrades for my sub 2000. These guys are awesome.
READ IF CONSIDERING
Listen, you’ve just bought a sub2000. You’re looking around for aftermarket upgrades and are thinking.. “do I really need “upgraded” screws?”. Now let me tell you this, the screws from factory are horrendously cheap. In fact, I bought the steel feedramp from mcarbo and went to install. I had never taken it apart before and only had it for a couple weeks. I removed all the screws until the last one.. stripped from the factory. Downside wasn’t that I couldn’t take it apart. The downside was as I was trying to get a bigger size Allen key hammered in all the internal components started falling about inside. Meaning I had to remove the screw to fix the firearm. This meant I had to go buy a screw extractor and buy a replacement screw. This simple 10 min job turned into about 3 hours. How long until another cheap factory screw strips out? If you are buying all the upgrades at once and plan on doing all upgrades in one takedown then take your chances. If you plan on implementing the upgrades slowly as you get the money and will be disassembling the firearm multiple times then please take my advice and buy the upgrades screws.
Carbon Steel better than OEM soft screws
These are great replacement screws that will last as lon as you have the rifle. MCARBO also sells these screws along witht ht Grip pins as a package and if you ever need to open up your Sub-2000 this is a must buy upgrade. Kel=tec uses aluminum posts and lower grade screws than these and they tend to strip out and make things difficult to open up. If you are upgrade the innards of your Sub 2000 add the screws and pins.
Christopher
Kerrville, TX
Good screwing
Great quality screws. By themselves but even better with steel pin kit. I already had a crossed screw in factory aluminum pins out of box. This is a must do in conjunction with all other internal components, cause you gotta take her down that fat to do these. NOW IS THE TIME, ONE AND DONE! DO IT ALL! take care of all the compromised cost cutting measures to keep price down of the factory..stock was engineered to be obviously ,for an occasional back pack truck gun usage. Make it a daily lifetime shooter on and done with changing out all justifiably wearable parts. These were a must do for me.easy install when videos are viewed, or with proper skills without
Made in the USA!
These screws are an easy and great way to update your Kel Tec. They are high quality and will outperform the original ones. I highly recommend.
Buy the pin and screw kit together
Screws are a sweet upgrade but don’t be cheap. Buy the pins and screws and pins together in the kit. You will want the pins, believe that!
Work great, already Rusting
I purchased the all in one trigger job bundle which came with the carbon steel screws and grip pins. However just a short 3 months after install I noticed rust beginning to build up on the screws. I live in the south in deep East Texas about 35 miles west of the louisiana border so rust is not something I'm unfamiliar with. However, the rest of the gun is doing just fine and I usually keep everything covered with a layer of lubricant as to fight off rust when not in my safe. I'm not sure if I should pop them out and hit them with some corrosion resistant paint or not.
Some what satisfied
I installed this simple upgrade so I wouldnt have to worry about striping screws. Unfortunately one of the screws (barrel hinge point) has a mis-shaped head and stripped out right away with very little torque applied. The rest of the screws were perfect. I believe I just received one bad one. Can expect them to check them all I guess.
Does these screws fit a gen 1 Keltech sub 2000
Yes, it will work if you upgrade to the grip pin.