- The SCCY CPX-1 & SCCY CPX-2 ALL IN ONE Performance Bundle by M*CARBO includes the best we have to offer for remarkable improvements in performance!
- Reduce your SCCY CPX-2 Trigger Pull from a stock ~7lbs to a modified ~4lbs (Average results can vary up
to +/- 1lb)
- Achieve nearly a 50% Trigger Pull Reduction, enhancing accuracy and the overall performance of your SCCY CPX-2 Pistol.
-
The Flat Trigger Upgrade for SCCY CPX 1 & CPX 2 allows shooters to place their finger lower on the trigger face, improving leverage and creating a lighter feel of the trigger pull.
-
Our Stainless Steel Guide Rod, coupled with Extra Power Recoil Springs, is 25% stronger than factory recoil springs, reducing muzzle flip and felt recoil for tighter shot groups.
- Elevate your firearm with performance-driven SCCY CPX-2 Aftermarket Parts for immediate results.
- This bundle is designed exclusively for CPX-1 & CPX-2 Models.
- Do you want Us to Install the Parts and Do the Polishing Work for You?
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED:
SCCY CPX-1 & SCCY CPX-2 ALL IN ONE Performance Bundle
Upgrade your SCCY CPX-1 or CPX-2 with the all-in-one Performance Bundle from M*CARBO! This bundle includes the best of what we offer, providing night and day performance results. With this bundle, you can reduce your SCCY CPX-2 trigger pull from a stock ~7lbs to a modified ~4lbs, resulting in a nearly 50% trigger pull reduction that will improve your accuracy and overall SCCY CPX-2 pistol performance.
The SCCY trigger upgrade includes all set-screws necessary to fine-tune the short stroke adjustment for your CPX pistol.
Pre-travel and over-travel distance may vary due to SCCY production tolerances/changes over time. We recommend starting with a 1/4" set screw in the front and a 3/16" set screw in the rear of the trigger to start.
Replace your plastic SCCY CPX-2 trigger with a CNC machined 6061 aircraft-grade aluminum SCCY CPX-2 trigger upgrade. The SCCY CPX-1 & CPX-2 flat trigger upgrade allows you to place your finger lower on the trigger face, improving leverage and lowering the feel of the trigger pull.
The stainless steel guide rod with extra power recoil springs are in total 25% stronger than factory recoil springs, which reduces muzzle flip and felt recoil, allowing for tighter shot groups. This is the best SCCY CPX-2 trigger upgrade for increased performance, providing a lighter and smoother SCCY CPX-2 trigger pull and improved SCCY CPX-2 trigger reset.
This performance bundle includes a 304 stainless steel captured guide rod assembly and extra power recoil springs with a 20lb set pre-assembled, compared to the 16lb factory set. The recoil spring power rating is a total combined power rating of the inner and outer spring.
SCCY CPX 2 & CPX 1 Resources:
If you're getting the SCCY CPX-1 & CPX-2 ALL IN ONE Performance Bundle, then you might find the following SCCY CPX 2 & SCCY CPX 1 Resources useful in further enhancing your firearm. Download the CPX 2 and CPX 1 Owners Manual or use the SCCY CPX 2 Exploded View as a Parts Diagram to plan your next firearm project.
Tested and Approved:
The SCCY CPX-1 & SCCY CPX-2 ALL IN ONE Performance Bundle has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the SCCY CPX-1 & SCCY CPX-2 ALL IN ONE Performance Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Seems to only work Dry Firing
Installed this kit into my CPX-2 just fine it would dry fire fine but when i would load live ammo i'm getting light primer strikes and sometimes the trigger wouldn’t reset or i would have to pull the trigger a few times before it fires
Does Not Work
This performance bundle does not work in my CPX-2. It seems to work fine when dry firing, but with live ammo you can't shoot more than 3 rounds without the trigger failing to reset. It made a terrible gun even worse. Had to remove the kit and restore the gun to it's original condition.
Nice and Easy Upgrade
I installed the guide rod assembly while at the range and it had an immediate positive impact. Much less muzzle flip and felt recoil was reduced. The original CPX-2 Gen 3 trigger allowed my finger to rub on the trigger guard causing a blister. After installing the new trigger that issue went away completely. I'm not sure the pre travel/over travel was really impacted much at all (mine was minimal already). I didn't install the lighter trigger spring assembly as I actually prefer the heavier revolver like trigger. I might buy a second CPX-2 and put it in that one. Installation is very easy if you follow the video instructions.
Ammo Picky cheap pistol
Gen 3 sccy, Installed the spring kit no problem. Light strikes 1 per mag, a few different types of ammo. Looked on MCarbo.com support and found you have about 5-6 ammo types to use. On the gen3 sccy the trigger is so hard to remove I did not want to heat the aluminum and plastic so decided to just not do the trigger. Tried to return the trigger and springs but that has been difficult.
DIY Delight
If you are a DIY guy or gal, you will have a ball and a smug look on your face because, it works and, it's fun! The trigger requires patience but is very doable, this is my second kit and each one was a tad different. My only ding would be, the slide return spring seems to be a bit short. So much so that when field stripping, it fell out once and was cattywumpas thereafter. Would I do it again.......YOU BETCHA!!!!!
SweetWilliam Wuz WildBill
Memphis, TN
Sccy trigger kit
Quick and easy to install. Trigger went from 7.8lbs to 3.2lbs. They are a budget gun ...but this makes them worthwhile and very shoot able. Great purchase
Cheap pistol transformed to great pistol in a hour. Unbelievable!!!!!
This kit turned a SCCY CPX-2 optics ready pistol into a smooth, dead on accurate shooter in no time. The installation was so easy as long as you get the armor tool which is only 6 bucks and watch the video on you tube. I have under 300$ in this pistol and it shoots better than my Glock 26. These guys are awesome and have continued to provide quality upgrades at competitive prices.
All in one performance bundle
A great improvement on the stock trigger very easy to install
Will this kit the cpx2 gen 2 models with under barrel rail? I see a lot about the gen 3, but nothing about gen 2.
One of the complaints I see about this pistol is light primer strikes. With all your lighter springs has that increased the incidence of light primer strikes? Do you recommend a particular brand of ammo with softer primers?
September 12, 2023 5:47 PM
Will your trigger kit fit cpx2 gen 3 model?
Yes it will fit, I installed it in mine. The trigger bar is slightly different than the one in the Gen 2 (there is no slot in it) but otherwise everything is the same.
Answered by
LSH /
April 8, 2024 3:49 PM
Actually, it appears to have been answered in another submission.
I am wondering the same thing and have the same question. Hopefully, someone from the company will answer our question.
On the Sccy CPX 1 , the stock hammer spring is 8.5 LB, what is your weight on the hammer spring?
February 24, 2023 11:42 PM
On the Sccy CPX 1 , the stock hammer spring is 8.5 LB, what is the weight on the hammer spring With this kit you have?
Answered by
/
March 10, 2023 1:30 PM
Our spring kit reduces trigger pull weight by approx. 50%
We can't release the exact weight of our springs due to legal reasons.
It will be approx 50% of the starting weight.
On the Sccy CPX 1 , the stock hammer spring is 8.5 LB, what is your weight on the hammer spring?
Answered by
/
March 2, 2023 1:25 PM
Will the Sccy CPX all in one performance bundle work in the new CPX-2 Gen 3 model?
Any update yet on when this package will be available again?
Hey Roger, sorry for the delayed response. These are back in stock and available for purchase now!
Answered by
/
December 16, 2021 9:49 AM
When will your CPX-2 ALL IN ONE Performance Bundle be available again?
September 9, 2021 10:00 AM
Hey Brother!
This will be available again in just a couple of weeks! Keep hanging tight!