Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
I bought this spring to lower the trigger pull weight of a new Ruger American Predator rifle I bought; in .223 Remington. The factory adjustment screw, based on the recommended adjustment range with the factory spring, never lessened the pull weight at all; which was right at 4.5 pounds. Even removing the spring altogether only reduced the pull weight to 2.5 pounds. So, thinking this spring would at least let the weight be there, 2.5 pounds, I installed it, again using the recommended set screw seating depth. With the new spring in and set screw "properly" adjusted, the trigger pull weight was still at just under 4 pounds. So, in the end I ended up trimming a coil and a half off this spring and installing it so that it just made the trigger return to the "reset" position reliably. Basically, this added little or no tension to the trigger. It just keeps it from being sloppy when the firing pin is at rest. With the "altered" new spring installed, the trigger pull weight is now at 2.5 pounds, as I had originally desired. Still thinking about replacing the whole trigger assembly in favor of a Timney or Triggertech model that will allow me to get down to 1 pound or less. However, all-in-all, the spring did what it was advertised to do; lowered the trigger pressure below factory spring specs.
take less than 5 min to install and works great
Easy to Install. Fast ship. Cheap price. Works great .ade a difference in my trigger pull great springs as always I bought 2.
I used the spring to improve my trigger pull from 2lbs 8oz down to 1lb 12oz. Great improvement for such a small price. This is the third rifle I’ve improved with M*Carbo products. Doesn’t get better than that!!!
Could not get my stock trigger any lower than 3.5 lbs on my Ruger American Predator 6.5 Creedmoor. Got this spring, followed the easy instructions and upon installation tested the trigger and it's now a smooth and crisp 2.5 lbs. Great inexpensive upgrade.
Put my trigger pull right where I want it. I don't have a trigger pull gauge but it's pretty close to my Kidd 2lb. trigger I have on my 10/22. Shipping was extremely fast. Thank You M Carbo
This spring kit is an outstanding improvement to the American trigger. Installs in 10 minutes or less, and give the trigger a clean break on my rifle at just under 2lbs. The product is made in the USA. Spend it where you make it guys...
This trigger spring is a great improvement over the "adjustable" trigger that Ruger puts in these rifles. I could only get mine down to 3 1/2 lbs until I installed the MCARBO spring. The trigger now breaks at 2 1/2 lbs with no creep. I will be buying more for other guns.
This is the second one I've purchased for a Ruger American. This one went into a 450 Bushmaster and brought the pull weight down to 2.25 lbs. Can't wait to get it on the bench to see what kind of groups I can get with my handloads.
INSTALLED IN MINUTES RIGHT NOW AT 2.98 LBS
If you have a Ruger American with the original trigger you need this trigger spring if you need accuracy. I do not have a scale to test the trigger pull but this spring alone made the feel go from nasty to slick. I am actually thinking about going back in and adjusting it a little tighter because it is so light. I left the adjustment screw showing one thread like the instructions said and it is very light. Brought my groups down to under one mil on my 100 yard targets.
This is a great option for reducing the trigger pull and it is incredibly simple. Why spend the money on a replacement trigger when this does the job
put in 2 rifles , super easy install , 20 minutes each gun , mostly take apart and put together.
Last week I installed this on my ruger american rimfire. Dropped the pull from 3.4 # to 1.8#, with a good clean break. I really can't think of any money that's better spent in the area of guns.
I was able to install this spring on my Ruger American Long Range Target in less than 15 minutes . This spring brought the trigger pull down from the factory 4lbs to a crisp and safe 2lbs. Another great product from M CARBO... Thanks, Lucio Vidaurri III
Very prompt service. Product was easily i stalled and made a great difference over the factory spring