Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
This is an outstanding upgrade for my 92! The instructional video is great, and the results were far better than I expected. I first only changed the springs and noticed improvement. Then, I disassembled again and did the polishing recommended in the video - exceptional difference! Then, being a bit of a tinkerer, I probably went overboard and polished nearly every contact surface in the trigger group: the Hammer Spring guide (all around where it contacts the hammer), the Hammer Pin and inside the Hammer channel for the pin, the 'shoulders' of the hammer that might contact the inside of the frame, the Trigger pin, the pin on the trigger bar, and the sear pin. I also polished the slide parts covered in the video, plus the locking block (just those sections inside the slide, not the parts that are exposed when the block operates) and the hammer release lever & firing pin catch lever where they contact the locking block. Gave everything a light coat of Mobil 1 grease and reassembled. All this 'overboard' work did indeed make a noticeable difference. The work does require a certain level of mechanical aptitude, but should be easily within reach of many owners.
Your video was a tremendous help, and your product worked great. Thank you for your excellent service and service to our country.
Springs worked perfectly in a Girsan Regard MC. The installation video was very helpful and the springs improved the stock trigger pull, DA and SA, tremendously.
The trigger pull in my Girsan Regard is so much better now. The installation video is amazing and easy to follow. I do recommend to use a 2 gallon ziplock bag when uninstalling and installing certain parts as springs will go flying. Also, for the Regard, the extractor pin is a roll pin and different than the Beretta. The 3/32 punch won't fit like it does in the video so I used the 1/16 punch and I was careful and went slowly so as to not bend the punch. A gun vice or a third hand would also make this process a lot easier. The DA trigger is buttery smooth now and the SA is on par with some of my CZ's. I definitely recommend this kit.
I just finished installing this kit on my Girsan Regard (Turkish clone of the Beretta 92). WOW - What a Difference! The factory trigger on the Regard wasn't bad, but now it is a whole different ballgame. And the MCARBO installation video was a lifesaver. It doesn't cover the decocker that is on the Regard, but there are several videos out there that do. For the Regard, there are a few differences from the Beretta. First, for some reason the Turks seem to love rollpins - on the extractor and the mainspring housing, they used them (which makes getting the mainspring plug reassembled a giant pain). Also, when re-installing the left side of the decocker/safety, I had to use a tool to move the firing pin forward out of the way (took me a while to figure that one out; apparently the Turkish firing pin is a bit longer than the Beretta) - I went in from the opening for the firing pin block. Finally, on the positive side, the Turks had already polished the sear, hammer engagement points and the top of the strut, so that saved a bit of time. In all, the Girsan is a little more of a pain than the Beretta, but installing the MCARBO kit has turned a low-cost 92 clone into a competition worthy pistol. Thanks Guys!
I think this kit is great and well worth the value! With the help of the instructional video it was a fairly easy project to do with the right tools. I went with the 12# hammer spring on my 92fs and it made the da trigger pull alot better! I know the single action pull is lighter as well but still not too light to be a surprise which I was worried about but this worked perfectly for my preference. Customer service is great as well as personal follow up to see how installation went, great company! Im happy and shooting it felt great!
Works fine, just flatten the kink on one side of the trigger spring. I had already polished/tuned the trigger group. Trigger was a clean 4.75 lbs sa. Now at 3.25 lbs sa. Recommended!
amazing kit, follow the instructions on their youtube video 5 stars i love it
Not hard to do, a few simple tools, watch their video, then follow along with the video the second time. take your time, if you are mechanical you can do this. I installed this kit in a Girsan Regard MC and it worked perfectly, no modifications needed. I used the 13lb hammer spring and it shoots fine with a MUCH nicer trigger pull. Its EASILY worth the money.
My wife could not pull the double action trigger on her beretta at all. It only took a couple minutes to install the new spring, and she can now pull the double action trigger no problem. It would be nice if there were installation instructions, especially for the more involved components like the trigger return spring.
I own a Girsan Six and that is just a full sized Beretta 92 with an extended slide and all the parts fit perfectly! From the Trigger spring to the extractor spring- overall an outstanding buy for the price!
Great spring kit that was easy to install thanks to Chris's step by step video. This kit along with polishing made the double action silky smooth and the single action light and crisp. The D/A is down to #7 and the S/A is a #3.5 and thats with using the #13 hammer spring.
Amazing upgrade easy to install and made a world of difference
After putting two magazines through my new Beretta 92 I concluded that the trigger could use some work. I searched online and discovered the highly rated kit by M-Carbo. Skip ahead, I got the gun back and damn, I'm impressed. I have many pistols and thrive on precision shooting. I have favorites and think the 92 will likely be among them. I'll know for sure after a few more hundred rounds but so far I'm dign' it big time. Anyway, the fabulous trigger job aside, M-Carbo is in DESPERATE need of someone who can communicate with customers. The first week I sent emails and made calls to confirm that my gun was received. Someone finally answered the phone after 9 days. It took a few weeks to get the gun back. During that time, communication was unreliable. All said, M-Carbo deserves 5 stars for the work on the gun - worth every penny. The two people I eventually spoke with were great guys. I can only hope that the company can pull it together on the communication end.
Installed in Girsan Regard MC9 with very little trouble. (first time doing this on any firearm) Makes gun a true pleasure to shoot 50 rnds or 500 rnds Replaced hammer spring with the 13lb spring. My accuracy and endurance have greatly improved. Highly recommend for the money you will not get a better upgrade
Just put this spring kit in my Beretta 92FS that we never shot anymore cause it was no fun & we have custom CZ’s that cost a lot more than a 92FS a lot more with awesome trigger jobs !! Trigger pull on the 92FS before was 10.48DA / 4.50SA.. After spring kit and polishing everything that touch’s metal to metal now I’m at 6.5DA / 2.05SA. As good are better than a more expensive trigger job. Installed steel guide rod and short reach steel trigger. Now the gun will be as fun to shoot as my Shadow2 and others . I have done 4 guns now with these spring kits from Mcarbo . Awesome work guys . Also their customer service is top notch also. I live 2 hours alway and if I was closer I would go to work there. It has to be a great place to work.