Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
My accuracy has always been poor with the LCP, now I have a chance of hitting something more than a few yards away. Makes the trigger pull much more reasonable.
Had 2 Ruger LCP’s (one was my wife’s) that did not want to close during chamber load; I had to nudge the first round in. Replaced the springs - mine with 13#, hers w/ 12#, fixed that problem. The old ones were supposedly 9#, but I suspect they were getting soft. Even after stretching them out a bit, the problem was not fixed. But these replacements made all the difference. Slide is very responsive on both guns, and wife is still well- able to rack the first round. I also really appreciate what this company stands for.
The springs were easy to install, the video was great and easy to follow. The reduction in trigger pull is significant and turned my LCP Custom into a new gun. My accuracy greatly improved with this small gun.
This makes the LCP much easier to shoot. The primer strikes on my CCI reloads are still solid/hard/strong strikes. Dramatically reduces the trigger pull (didn't measure it, but it's really noticeable). Only "downside" was a friend now wants me to help him install his LC9 trigger spring kit after seeing my LCP's new trigger weight.
Night and day difference. Bought one for myself and my dad, we both like this trigger upgrade.
Easy install with Video Feels so much better than stock springs can't wait to get to rang to put some shells through it
Love the hammer spring, goes well with the trigger upgrade. However, found the trigger return spring too light, it just didn't feel positive enough on the reset. Keep your old parts you may want them.
I just installed the kit in my LCP. I like it except for the trigger return spring. I found it to be a bit too light with not enough of a positive return, almost like the trigger couldn't keep up with my finger. I removed it and kept the OEM TR spring in the pistol.
Received mine quicker than I anticipated, due to Covid-19! Ordering and shipping was top notch! Easy install! Thanks again!
Ordered this trigger kit on-line. Received emails on the status of order. Received the kit in two days. Watched the installation video which is very useful. Installation of the kit was easy and was done in a short time, it took longer to clean it and polish the feed ramp. This spring kit definitely dropped the trigger pull poundage. I've shot two boxes of different types of ammo and had no issues at all.
Shipping was stupid fast. M*CARBO couldn't have driven it here that fast. I did the swap using the instructional video. Too easy. I've already recommended this kit to friends. I am not a fan of the LCP for EDC, but sometimes you need a pocket pistol. With the trigger pull reduction, it will be much easier to fire accurately. I strongly recommend this kit.
I'll need to share this with a good gunsmith. The initial step resulted in me bending two punch pins. Not sure why that is, but not an easy trade out of springs like job I had with my 870 and ABolt.
I was initially concerned that the trigger work might make my pocket pistol unstable for said carry position. After install, no worries, the kit reduced trigger pull from 6.7 to 3.7ish lbs based on Measurements. So here’s some other install procedures that will help as follows: 1. The firing pin retaining roll pin is the more challenging. The advised 3/32 is a bit to big when initially starting the pin removal since it starts off in an angle, 1/16 is better starter then finish with 3/32. 2. Reinstalling the retaining firing pin is a bitch. Getting the pin started is not as simple as the video illustration. Also, be careful not to over press the firing pin when reinstalling the roll pin because you can accidentally push the pin to far and tap the roll pin behind the firing pin. Simply put, coordinating punch and reinstalling pin is doable but be prepared to spend some time refitting. 2. When reattaching the hammer spring to the base pin, make sure your needle nose pliers aren’t bent at the tip, the spring will slip off the pliers repeatedly making the final step frustrating. All in all, after installing all spring upgrades, I love the final results! Get one before you can’t.
One of the best for the price upgrades, along with the houge handal grip cover 50 dollars totally changes the pistol
Smooth clean trigger pull in my LCP with this kit installed. No failures of any kind so far. Really notice the effect of better trigger control when I’m engaging targets beyond arm’s length distances. The installation video is REALLY GOOD. Watch the video a couple of times so you know what’s coming next, then re-run it once more while you are doing the install.
My only lcp complaint has always been the trigger. This upgrade did everything I hoped except reduce the travel of the trigger which I knew this kit was not going to do. It did, however, reduce the force required by more than half making this little gun much easier to shoot. I have not put any rounds through it just yet, but there is a huge difference in dry fire testing. The installation video was very well made and absolutely required for install. As always, excellent product and excellent company. Will definitely continue to do business here.