Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Shipping was fast. The spring kit installed and operated as advertised EXCELLENT product I will definitely be using mcarbo again.
Works fine on my Canik C100. Minor differences (be careful not to loose the spring and ball bearing on the safety and the tiny-tiny detent for it). Video is excellent. High quality resolution and great instructions. As simple as it gets to install the kit following the instructions. Reduced the weight of the trigger pull by almost 8 LBS!! on the double action and by 3 lbs on single action!! Great job M*CARBO.
I’ve installed many MCARBO upgrades but this one definitely was the most challenging. I watched the video several times before even placing the order so I knew upfront what I was getting into. Even with old eyes I enjoyed the challenge and the outcome definitely made it worthwhile. I did the work in sections rather than doing it all in one sitting but that’s just me and helped keep my patience. I should mention that I had previous work done by a gunsmith and ended up swapping my old hammer spring back in. The final trigger pull averages to 6 lbs. 8oz DA and 2 lbs. 5 oz. SA. I love this gun and it shoots incredibly now after the upgrade. The hammer spring is an easy swap if I decide that the trigger is too light and just reinstall the one from the kit. The installation video was great as usual but lacks detail for removing the decocker in the PCR model which is different. I found other videos on the web that was a big help for that portion only but otherwise stuck to the MCARBO video.
I upgraded an already awesome gun, CZ 75 SP01 Tactical Urban Grey with the M Carbo Kit. Great product, great instructional video for the install and great result! It turned this gem from an outstanding competition gun to an awesome one. Kudos to M Carbo for providing an awesome product with a reasonable price. A satisfied repeat customer.
After replacing the springs/pins from this kit into a customer's CZ75B the trigger pull in SA and DA was reduced by almost 40%. As a disabled combat veteran owned small business myself, I prefer to patronize disabled veteran owned businesses and this experience was fantastic. I will be a repeat customer. Army Gunworks
I replaced all the factory springs on my CZ 75B and 75 Compact with MCARBO Trigger Spring Kit and now the trigger is very smooth and light. Much much better performance than the factory trigger. Very Happy Customer.
Product works as mentioned, installation was definitely more complex than other firearms However the detailed instruction videos are nice and walk you through it. I have yet to shoot the cz since installation but trigger pull is definitely lighter both single and double action. The free floating trigger pin is a must unless you enjoy driving in roll pins. Unless you are competent with cz firearms I’d have a gunsmith install the parts.
I'm seventy nine and my hands tremble at times. It took bit longer to install the spring kit, but the result was a significantly reduced trigger pull. I have installed the kit in four CZ 75's. Looking forward to the kit for the CZ 97B!
5-star performance by M*CARBO so far! Product was quickly and accurately delivered. Parts look and feel high quality. Trigger job will be performed as soon as I get my hands on my new Tristar S-120. Will let you all know!!!!Photos to follow!!!! Your second-to-none customer service should be emulated by all in the industry!!!!
The CZ 75 B New Edition is an excellent pistol, however I wanted a lighter trigger pull for competitions. The trigger replacement kit reduced the double action from 10.5 lb to 7.25 lb. More importantly, the single action reduced from 4.5 lb to 3.0 lb. It is a pleasure to shoot and my accuracy has improved.
Excellent kit. Great value for the money. Installed in my CZ 75 SP-01 and it made a noticeable difference in trigger pull weight and performance. Highly recommend and recommended to all my friends with CZ's.
I do not have any means of meauring trigger weight, but my trigger is 100% better since installing the spring kit in my P01. Smooth and crisp with very noticable reduction in pull weight. The kit was easy to install and took about 30 minutes (this is the first time I have ever disassembled a firearm beyond stripping it to clean). I did not remove the sear cage, but rather used the sear pin and slave pin to meet in the middle and released only the sear spring. The tension on the decocker spring made it pitch towards the space where the sear spring sits, but was able to hold it back in place with a pick while dropping new sear spring in. The floating trigger pin was easy to install and the entire assembly was easy enough to do with the correct tools. Great kit. 250 rounds through the gun yesterday and I am very pleased.
This kit is excellent and highly recommended. There's an instructional video which was very helpful and if you're not used to changing these parts out I would make sure you watch it and follow along. Great job guys!
I would like to start off by saying the upgrade springs took an average - good trigger and made it into one of my favorites in the collection. The youtube video instructions on how to strip the firearm and re-assemble was incredibly well done. Even though I have disassembled a decocker CZ75 before, I decided to watch the video and learned new tricks, and using the included tools, the process was vastly better than I have experienced in the past. Any future upgrades for triggers I will be shopping MCARBO first.
Installed this kit on my CZ75B. Installation video is a must to watch before and during installation. This kit definitely improved the trigger function. Will be purchasing this same type of kit for my CZ 97B and M&P 9 Shield later this year.
I installed this on my CZ 75 D PCR--Great value for the cost. I had a bit of trouble getting the sear group out, so I didn't even attempt installing the sear spring, but that part looked a little hairy anyway. Even without installing that part, it's much improved double and single action pull weight, and smoothed out the DA trigger pull as well, it seems. A few small installation notes for PCR owners--once you switch the spring on the firing pin, and then the firing pin block spring (the circular plunger that keeps the firing pin "in" and not bouncing out the back of the gun)...if you reassemble the gun then, and drop the hammer by pulling the trigger (after confirming gun is safe), it's easier to hammer in the enhanced firing pin retaining pin, because the hammer will hold your channel open. Oh, and the trigger spring--after trying it how the video did it, I had better success hooking the long leg onto it's part of the plate, then using it as leverage to "lean" the lower short leg into place.