Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Very nice kit with very good supporting video. Took me approximately one hour to go from a 7-3/4lb trigger to a 5-1/2lb.
Very happy with the product and the results easy to install would highly recommend
After attempting to cut my trigger finger off (luckily it was saved), the almost 8lb trigger pull was to much for me to handle. I thought I was going to have to by another gun. Then I found this M*CARBO site and their trigger spring kit. I figured $20 is a whole lot cheaper than a new gun so I "pulled the trigger" and gave it a shot. Boy what a game changer. Thanks M*CARBO. You save my a trip to the dog house by not buying a new gun.
The spring products are great. The assemble tool that I used could have been a bit thicker and an 1/8 of an inch wider to help with the install for the trigger return spring. It was useless for me. I did use a small screw driver and pin punch on the right side to align the trigger return spring items. It took me several times to complete because the slide stop level would always misaligned and not stay aligned. Also I am not sure why you didn't include the - main SW9VE Sigma Trigger Spring. Have to order it separately.
I got one of these kits for my SD9VE based on my experience with the kits for my Kimber Micro 9 and 380. Well, this one wasn't quite as easy to install as the two Kimbers. I had trouble getting the slide stop to line up correctly. I'm sure it was just a matter of me holding my mouth wrong or not using the correct cuss words or something, because suddenly it all lined up and VOLA...it was in. A HUGE difference in the trigger pull. Highly recommended, and well worth the price.
Installed this spring kit, definitely makes the trigger smoother and lighter. Only problem is the striker spring is too light, put around 60 rounds through it and had 2 malfunctions. Never had that with stock springs. Ended up changing the striker spring back to original
Spring kit had the advertised result of significantly reducing trigger pull. I found the installation tool however to be pretty much useless. I used the shank of a drill bit slightly smaller the the pin and pushed it in through the first half of the trigger from the right side. I then started the pin in from the left side through the slide lock. the first half of trigger and picking up the return spring. From there I pushed the drill bit out with the trigger pin, using the drill bit to finish lining up as needed. My primitive trigger pull gage proves out the stated numbers exactly!
Ordered the kit and it actually came two days sooner than what I was told. I followed the video for installation without any problems. I would recommend this kit to any Sd9ve owners.
replaced apex spring kit with mcarbo. mcarbo better for me. smoother trigger pull all the way through the break. same trigger pull of 4lb10oz. starts pull slightly stiffer but finishes smoother.
Ordered my spring kit and MCARBO absolutely blew me away with the shipping! Great experience and like I mentioned shipping and customer service ABSOLUTELY amazing!!
Solid kit as always from Mcarbo. Noticable reduction in trigger pull with audible reset. Well done as always.
Got the SD9VE spring kit, followed the YouTube video for installation and polishing. All I can add is "WOW"! The upgrade was exactly as described in the video. Super sweet trigger action now, smooth as silk. Regards, Al
I ordered this kit and it really impressed me. Delivery was prompt and MCARBO sends a nice sticker also. The spring kit is a must have for the sd9ve. The install video was great and the trigger pull is much lighter and smoother. I recommend watching the video a few time before you start installing the kit but it went in pretty easily and I could not be happier. Thank you MCARBO!
Shipping and service is first rate. The installation video was spot on and made the install very simple. I can definitely feel the difference in the trigger pull. Haven't gotten to the range to test it yet. Hopefully I can actually measure the pull weight. I like the feel much better than it was.
Great product easy to install just takes a little patience makes a super difference in the trigger pull a must have for any SD owner!
Okay, the "kit was finer than frog hair. And with the extra polish I did on the trigger transfer bar and the striker block.. WHOOOEEE! I am getting a very consistent 3.8 lb trigger pull. The SD9VE is a great little weapon anyway so with the trigger pull reduced and super smooth.. Oh man. This is slicker than greased snot on a teflon doorknob!! BUT I had to take one star off. Not because of the kit but just because getting everything back together was a pain in the tookus!!! But the MC CARBO STUFF? It was Great!! I have used 3 different kits from MC CARBO and they all are hunky dory!!