Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
The ramp, mag release,loader, and spring tool arrived promptly. The parts were all top tier quality. On instilation I will say for the ramp install the spring tool is invaluable. The only tricky part is the tiny spring that passes thru the hole in the slide stop. Once I got over thinking the ramp must be pressed into the frame slot, and realized backed up a little, gave it enough movement to align the spring leg with hole. Both sessions with 4 different brands and weights of ammo went flawlessly 100% reliable even mixing 30s,40s, and 45 gr. The mag loader worked very well. I would buy all parts again and recommend them for top performance. Frederick
Ordered this product and it shipped 24 hours later. Received e-mail confirmation of shipping w/ tracking. Order arrived in 2 days (I live in the same state it shipped from), despite covid and associated slow-downs in the post office. Customer service is fantastic. I'll leave another review once I get this installed and test it out. At the very least, you can rest assured that the company is excellent to do business with, so order w/ confidence.
I received a problematic PMR30, with terrible feeding issues. I ordered the SS feed ramp along with the mag release upgrade. After installation, and a bit of firing pin work, this thing is a machine!! It feeds and shoots like a dream!
I upgraded the feed ramp, mag release and trigger on my CMR-30. Ran 120 rounds through it...NO FTF, no stovepipes, amazing! Even ran a mag of 30gr Hornaday VMax through it...perfect. Just ordered the grip kit, already installed on my PMR-30, nice. My only suggestion is to do an upgrade bundle like for the PMR-30 (did that upgrade, too). Target attached...not bad for an old guy at 15 yards.
I ordered this to resolve the incessant feed issues. It really has helped, more than I thought it would. The original ramp is really just trash. My only knock is that I did not get the latest design. (the spring was a pain to put back in place)
First GEN was great Bought GEN 2 is even better bought 2 took out the the little slack I had in the magazine to paper thin also works Great have 2 PMR 30 's so have to buy 2 of everything
I have not installed it yet but it is a very well made item. I will follow up with this review once installed.
I disassembled my PMR 30 two days before my feed ramp arrived so I could practice the installation procedures. I knew with bad eyes and fat fingers this was not going to be fun!😂😂 After a few tries with the old feedramp I pretty much gave up and was going to find a gunsmith to do it. The day it arrived I cut a tiny v in a flathead screwdriver from an eyeglass kit. It took me all of two tries and the spring snapped really gut into place! WOOHOO!! Done deal. The pistol ran through two magazines without a hitch so I am very satisfied . Thanx Mcarbo Bros!
Bought 2 and installed, enjoyed doing the install myself and getting to know my gun. Works very smoothly
works great easy fitting video was very helpful a ten minute job
Did the install on the stainless feed ramp and it works great look forward to doing some more up grades thanks for the great parts
I really really wanted to write a review that this helped the feeding issues with PMR 30 but I can't. I followed the instructions to the tee but it wasn't any better after I replaced the plastic feed ramp with this one. But it didn't seem to be any worse either.
The best thing I could have done to improve this gun I ran 30 grain and up different manufactures NO PROBLEMS could not believe it , it is now the gun that I wanted in shooting 300 rounds the only problem I had was the magazine catch So now I bought one of these Expect it to be just as GOOD YOU GUYS ARE GREAT YOUR PRODUCTS ARE GREAT THANKS keep the good work up now make a better buffer THANKS AGAIN Dennis
Feed ramp fit perfectly. Polished up great! The quality and machining is obvious vs the plastic part. The spring was hard to get in place, but that was not the fault of the product. Using the spring tool is a must and I would recommend purchasing the polishing kit - worked great with my dremel.
i bought the stainless ramp and mag release in addition to the polishing kit and the tool. The ramp was perfect after polishing. Installation proved to be a challenge. Not because of the product, but because of my older eyes and big fingers. After installation I shot two mags through it without a single misfire. Great product and a HUGE improvement to a pistol I really like. Great guys doing great things. Many thanks!
Installed the Feed Ramo and Mag release-Used a pair of tweezers for the slide spring and worked pretty well.Took it to the range and had all kinds of issues.Rewatched the Install video and realized my problem was a dead trigger.Pay close attention and not over tighten the screws Chris points out on the video that will cause a Dead trigger.I loosened those screws up and went back to the range and that Baby was AMAZING !