Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Excellent upgrade to the Sub 2000, Makes a giant difference! A must do for your gun.
Just want to say the installation of your springs, screws, and trigger kit for my new Kel tec sub 2000 gen 2 went really smooth. Did not know if I wanted to tackle it myself, but went for it. Your installation videos were excellent, the only problem I had was with the trigger guard assembly spring, it slipped out when I took gun apart, and I had to figure out how to realign it. You might want to mention this in future videos. It did not snap into place when putting the barrel on. What a difference the springs, screws, and trigger kit makes! I highly recommend your product! Thanks!
huge in reduction of felt torque and snap of the often dreaded 40 cal round. in conjunction with the target trigger a must have for your sub2K
Made a huge difference in pull strength. Smooth and crisp reset. Easy install with great instructional videos.
The trigger pull went from 9.7lbs to 4.8lbs that is a huge improvement I will definitely recommend to others.
Went from 9.5 lbs to 4.25 lbs just by installing these springs! Fast shipping and excellent customer service too.
It really made a big difference. I highly recommend it to everybody. The customer service was fantastic!!! Thanks you guys, I'm pretty sure I will order from you again
<p><span class="J-J5-Ji"></span></p><div><div></div></div><h2>I've been recommending your kits to friends since I installed mine last night.Hoping to get out to shoot a little tomorrow.The difference in the trigger is amazing.Thank you for making great,and affordable products.I give it 5 stars.</h2>
The spring kit makes a good little carbine even better. I opted to put the trigger and trigger guard in at the same time. No more trigger bite. Very pleased with quality and the installation videos were helpful.
These guys know what's up! After you purchase this spring kit and watch the videos, you will know way more about your gun than the average Kel-Tec Sub 2000 owner. While the process does look overwhelming, after this process you will know how this guns works and will be much better off down the line is you ever need to fix it your self!
Cuts the trigger pull weight to 5 lbs as advertised.
i put this into two sub 2k's along with the new triggers. a huge improvement. i have two little gripes... i wish the trigger reset was more positive, and these things are kind of a pain to work on. a better castle nut, or castle nut tool would be great. maybe a future upgrade? The videos, if both viewed completely, then paused along the way- will get you through the process more or less. i feel like one succinct video could replace these two existing ones and better help people through this.
Your instructional video is spot on. Cannot wait to get to the range and test the results. Keep it up guys. By the way start working on a Mossberg 930 trigger spring set. I'll take one when you get around to it. Thanks Again, Angel Acosta
i bought the spring kit,trigger bar, and trigger and it has made a big difference in the performance of the riffle a lot lighter trigger pull and a crisper no travel trigger. i also bought the red dot mount buffer tube cover and the charging handle, i love these products very well made. Thank you M-Carbo. they also shipped the order out quickly and i received it fast. I love this company good job guys.
I installed the spring kit for the Kel-Tec Sub-2000, it went as smooth as can be expected when disassembling and reassembling a sub-2000. Although I have taken my Sub-2000 apart before I checked M CARBO's instructional video and picked up a couple of tips. It took about an hour or so with some other stuff I did while inside the gun. As I said, it wasn't the first time I had the carbine apart. The trigger pull is now at 3 lbs., pretty juicy! After the spring installation I shot a Steel Challenge match and finished 1st in the PCC division (Pistol Caliber Carbine) and 1st loser (2nd place) overall! You can't do that with the factory setup! Below I added a link to my Youtube channel which offers other tips and tricks to use while disassembling and reassembling a Gen 1 Sub-2000 and other gun things too. I hope M CARBO won't mind. https://www.youtube.com/channel/UCD1L92JXM71JRiyow5JNSvQ
I put the spring kits in two SUB-2000's, and while I am most definitely NOT a gunsmith, I managed to get it all back together without any leftover parts. ;-) The trigger pull went from well over 12 gritty pounds to less than six with a lot less creep. One gun was set up for my Honey, the other for me, and we are both happy with the improvement the kits provided, it was sorely needed. The replacement screws were also a good idea, and well worth what they cost. If I had it to do again I'd do it the same way!