Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
It was a pain to install but it was worth it.
I installed the Short Stroke Flat Trigger on my new P365 .380 and it significantly reduced travel and made the trigger much smoother. I also have the Sig Sauer straight trigger on my P365 9mm but this trigger is far superior in quality and adjustments. When back in stock I will replace the Sig straight trigger on my p365 9mm. The video’s provided by MCarbo are far superior to other videos. Easy Installation.
Getting adjusted to the 365 OEM trigger drove me nuts, this trigger really fixed my main issue with the gun.
This trigger and MCARBOs spring kit brought the wall to a 90 degree angle and also reduced the pull weight from 7# to 4#!! Would def buy the combo again and if I need any of their other products for other firearms I would not hesitate! On top of great products they also take the time to send videos that aid with installation! Need more companies that do it like this!
First off lets give some props to MCarbo they are out here really trying to produce quality parts, which myself really does appreciate. So far I have installed the Flat Trigger, and the spring kit. My 365 feels like a completely new firearm, minimal creep and amazing break on this trigger while still feeling safe enough for me to Appendix carry. In my opinion dont buy this trigger unless you go get that spring kit the two make this pistol feel amazing, but dont let me forget the only problem I had. That came with once I had everything done and went to put the slide on the safety lever would get hung on the end cap of the slide. This seems to only happen to a few individuals, not everytime. The solution I found was to push down on the safety lever with a punch and push that slide on with some elbow grease, other than that im very happy with my purchase.
Install was somewhat easy? Not difficult by any means. Operates smoothly and flawlessly. Looks great, feels great, works great, is great.
Installing the trigger is easy, but the "short stroke" is too short for my striker to reset when the slide is raked. I have a late model 365XL with external ambidextrous safety. The striker is different than earlier models of the P365. When I installed the M*Carbo trigger, the striker would not reset. I was a dead trigger. I re-installed the factory Sig trigger, and the pistol functioned as it should. I re-installed the M*Carbo trigger with no joy - again - dead trigger. I re-installed the Sig trigger and all works... I re-installed the M*Carbo trigger - dead. I did this three times. I believe the "short stroke" and forward position of the trigger bar is not allowing my striker to reset. I asked M*Carbo for any ideas or if others have had a similar problem. No reply. I sent it back for credit as it's useless to me.
I purchased both the trigger upgrade and the spring kit. I don't know what the trigger pull was before the upgrade, but I'm now pulling 5lbs7oz (confirmed with the Wheeler digital gauge). I also did a trigger job polishing the sear, etc. It is much smoother and easier to control the shot. The videos explaining the installation were extremely detailed and helpful. It made the installation a piece of cake.
Just installed this today in my 365 X Macro along with the titanium striker and spring kit. Went well, a couple of differences in the xmacro than the 365, some of the spring placements are now a hole and the take down lever has to be put in when the trigger is because it will not fit after it is put in, you cannot get the little tab over the 'lip' for it to seat properly. took me a minute to sort out how to get it together but long story short, I got it in.
I bought the trigger with the spring kit. On a scale of 1-10 the "slack/space between original position to the wall" is a 2, which is great. This still allows some play before the trigger break. This will help with "jerking the trigger". Trigger is still a good weight so I use it for my concealed carry with no issue. I had my original trigger for over a year before I switched. IMO it's best to become proficient with stock trigger then switch. That way the trigger is an upgrade and not a "quick fix".
The title says it all. I purchased the trigger and spring kit for my Sig P365 and had them installed and wow what a difference in pull and comfort. It went from a 6.5 lbs pull to a 3.8 lbs. And the fast shipping is nice also. Thank you MCarbo
Great product and customer service from mcarbo.
This is the real deal! Ordered the MCarbo flat trigger and the custom springs! This combo dropped the weight of my P365’s trigger pull from a measured 7.3 lbs to 4.3 lbs! It has less travel and breaks clean with minimal over travel. Awesome upgrade! The service was lightning fast! Thanks MCarbo!
I installed the M*Carbo flat trigger in my P365 last week and have fired 100 rounds with it so far. The trigger is a definite improvement over the stock curved trigger. It has a lot less uptake, a clean break, and a much shorter reset.
Love my new macaron short stroke
This trigger along with the spring kit improved my accuracy, and feels great on the pull. So far I have shot about 150 rounds in a variety of ammo and have had no reliability issues at this point. Also the quality is fantastic. I would definitely consider this an upgrade from the factory sig curved trigger.