- Precision machined from A311 stress-proof carbon steel.
- Effectively reduces felt recoil and muzzle flip.
- Hybrid design combining features of both muzzle brake and compensator.
- Compatible with any 9mm barrel with 1/2"-28 threads.
- Includes a 1/2 x 28 crush washer.
- Easy installation with a standard AR-15 armorer's tool or 3/4" wrench.
- Consider using 1 or 2 layers of masking tape during installation to protect from scratching.
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED:
Smith and Wesson M&P FPC Muzzle Brake
Warning! Avoid over-tightening to prevent snapping the barrel threads.
The M*CARBO Smith and Wesson M&P FPC Muzzle Brake not only maximizes recoil reduction and compensation but also extends the firearm by approximately 1" after accounting for the thread length. Suitable for competition or home defense use.
Installation requires a standard AR-15 armorers tool or a 3/4" wrench. To prevent scratches, consider adding 1 or 2 layers of masking tape to the brake.
This muzzle brake combines the advantages of both a muzzle brake and a compensator, allowing for more stable and controllable rapid fire, keeping you on target consistently.
For optimal performance, while Rocksett is not mandatory, it is recommended due to its 1,500-degree temperature rating and removable strength properties. M*CARBO excels in producing high-quality aftermarket parts, enhancing the Smith and Wesson FPC's performance.
Enhance your shooting experience by reducing both felt recoil and muzzle flip with this single upgrade. Stay tuned for more custom modifications from M*CARBO to elevate the Smith and Wesson M&P FPC factory capabilities!
Smith and Wesson M&P FPC Resources:
If you're getting the Smith and Wesson M&P FPC Muzzle Brake, then you might find the following
Smith and Wesson M&P FPC Resources useful in further enhancing your firearm. Download the FPC Owners Manual or use the
Exploded View of the M&P FPC Parts Diagram to plan your next firearm project.
Tested and Approved:
The Smith and Wesson M&P FPC Muzzle Brake (9mm Only) has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Smith and Wesson M&P FPC Muzzle Brake (9mm Only). Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
S&W M&P FPC Muzzle Brake
This Muzzle Brake is just perfect for my FPC It was easy to install and it really looks great, Please don't go by the you tube video on how to install it, because it does not have to be tightened 3 full turns. My Muzzle Brake only needed 3/4 of a turn with the crush washer and it was ready to go. I don't know why the installer in the video had to tighten the Muzzle Brake 3 full turns against the crush washer, but don't do it or you might end up with a crushed barrel and not know it which could be very dangerous when you go to shoot it. Thanks to M*Carbo for the great price, with free and fast shipping.
Great Product and Value
Customer Service at MCarbo is Legit! Received in 4 days from order and product was as good as described. Even gave me a QR Code to view installation video (if needed). Not really an off the shelf item at retailers so appreciated them having stock. Plus would rather support the little guys. Will use the muzzle brake on other 9mm Carbines for sure.
Disappointed
Thank goodness for youtube. Mcarbo was unable to give me installation instructions but there was a youtube video that explained the process. I am disappointed because it seemed to make very little difference between the muzzle brake installed and the muzzle brake not installed. Kick is the same and the gun still moves the same amount of distance.
Smith and Wesson M&P FPC Muzzle Brake
This is a great addition to your M&P FPC. Not only does it look good, but it really does diminish the recoil and makes it a lot quicker to reacquire your target. I honestly wasn't expecting a whole lot of improvement in the performance of the gun, but was pleasantly surprised. Now that being said, the installation was a lot more difficult than I originally thought it would be. I ended up having to completely remove the handguard so I could get a good bite on the barrel to torque this bad boy on. Normally you might think that's not such a tough job, but apparently Smith & Wesson hires retired Circus Gorilla's to crank down the 16 screws holding the handguard on and that turned into a story for another day :)
FPC muzzle break
Looks and fits perfectly.
M&P FPC 9mm Carbine
Works like a dream and looks great as well! I Would highly recommend this to anyone considering one of these. Fine craftsmanship in the manufacturing of these.
Will this fit the S&W Response 9mm as well?
Will this fit the S&W Response 9mm as well?
Will this fit the S&W Response 9mm as well?
Will this fit the S&W Response 9mm as well?
Will this fit the S&W Response 9mm as well?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Will this work on Smith and Wesson Response 9mm?
Is it necessary to clamp the barrel when tightening the compensator, or is the barrel secure enough to simply wrench the compensator directly onto the barrel?
Can this be shipped to Ontario Canada
Can I use a locknut instead of a crush washer to install ?
I purchased 1/2"-28 Jam Nuts off Amazon and it worked fine. I was not confident in clamping barrel so did not use the crush washer, but the crush washer would probably look better.