All Internal Upgrades SUB-2000

MCARBO MIL-SPEC CLP/Cleaner + Lubricant + Preservative Advanced Corrosion inhibitors that meet new corrosion protection requirements that exceeds the D version of MIL-PRF-63460.Military Issue CLP is...

MCARBO MIL-SPEC CLP/Cleaner + Lubricant + Preservative Advanced Corrosion inhibitors that meet new corrosion protection requirements that exceeds the D version of MIL-PRF-63460.Military Issue CLP is for use in cleaning, lubricating and short-term preservation of both small and large caliber military weapons, operating in the temperature range of -60 to +160 °F.Superior lubrication and protection to all areas of your firearm reducing the wear and tear caused by frictionCombat Tested & Approved:...

1,000 Grit Ultra Fine Silicon Carbide Sandpaper Silicon carbide sandpaper is an abrasive sharp synthetic mineral that cuts fast and smooth. Use with water or cutting oil to reduce clogging and...

1,000 Grit Ultra Fine Silicon Carbide Sandpaper Silicon carbide sandpaper is an abrasive sharp synthetic mineral that cuts fast and smooth. Use with water or cutting oil to reduce clogging and extend abrasive life. Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.

2.5mm T-Handle Wrench Fastest way to remove SUB-2000 Screws by hand with the "Flywheel Effect" Bondhus 2.5mm T-Handle Hex Wrench is Made in America. Recommended for removing the 2.5mm screws on your...

2.5mm T-Handle Wrench Fastest way to remove SUB-2000 Screws by hand with the "Flywheel Effect" Bondhus 2.5mm T-Handle Hex Wrench is Made in America. Recommended for removing the 2.5mm screws on your SUB-2000. Cushioned, Ergonomic, curved handle increases comfort and reduces fatigue. Handle is welded directly to blade for a tool that will last a lifetime. Handles are designed to match torque capacity of blade. The slight downward angle of the handles is ergonomically superior to a straight...

KEL-TEC SUB-2000 Mag Catch Spring Replacement Handy to have these as they easily get lost or bent out of shape. Part number 208 on Exploded View ...

KEL-TEC SUB-2000 Mag Catch Spring Replacement Handy to have these as they easily get lost or bent out of shape. Part number 208 on Exploded View

2.5mm Hex Keys (Set of 2) 2.5mm Hex Keys to assist with the installation of our SUB-2000 Carbon Steel Screw Upgrade Kit and SUB-200 Carbon Steel Grip Pin Kit. Set of 2 Hex Keys. ...

2.5mm Hex Keys (Set of 2) 2.5mm Hex Keys to assist with the installation of our SUB-2000 Carbon Steel Screw Upgrade Kit and SUB-200 Carbon Steel Grip Pin Kit. Set of 2 Hex Keys.

SUB-2000 Collar Adhesive - Loctite 380 "Black Max" The Loctite 380 "Black Max" is a black, cyanoacrylate adhesive that comes in a 3g tube. This is what KEL TEC uses from the factory to secure the...

SUB-2000 Collar Adhesive - Loctite 380 "Black Max" The Loctite 380 "Black Max" is a black, cyanoacrylate adhesive that comes in a 3g tube. This is what KEL TEC uses from the factory to secure the Collar to the back of the SUB-2000.  You really need a strong adhesive like the Loctite 380 "Black Max" to bond the aluminum collar to the plastic trigger assembly since there are no threads for the collar to tighten up against on the firearm. This low viscosity, durable adhesive is great for a...

Loctite Threadlocker - Blue 242 Great for preventing screws from backing out during shock and vibration. Ideal for firearm applications. Removable Blue Threadlocker is most ideal for keeping screws...

Loctite Threadlocker - Blue 242 Great for preventing screws from backing out during shock and vibration. Ideal for firearm applications. Removable Blue Threadlocker is most ideal for keeping screws in place that may need to be removed again in the future. Recommended for most Firearm Applications Loctite Threadlocker Properties Chart Temperature rating up to 300 degreesTorque rating up to 110 in-lbs MFG# 24200 .20 FL. OZ. (6ml) Tube Designed for locking and sealing of threaded fasteners which...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging internal parts and components. We had them custom manufactured just for this application! Made in the USA!