WHAT'S IN THE KIT:
- 1 - Custom Trigger Return Spring
- 1 - Custom Sear Spring
KEL TEC KS7 Trigger Spring Kit
Best KEL TEC KS7 Trigger Upgrades for the all around performance and reliability enhancement. KEL-TEC KS7 Trigger Spring Kit will improve your accuracy and tighten your shot groups. The KEL TEC KS7 Trigger Spring Kit will reduce your trigger pull weight from a factory 7lbs. to a crisp 3.5lbs.
This KS7 Trigger Spring Kit is made of the highest quality spring steel available, right here in the USA! Reduced malfunctions should be expected because the KS7 springs are constructed of the highest quality 302 stainless spring steel & ASTM A228 music wire.
KEL-TEC KS7 Trigger Spring Kit is the Best Way to Upgrade your KS7 Trigger! If you pair this KS7 Trigger Spring Kit with the KS7 Aluminum Target Trigger Upgrade you can also expect to eliminate Pre-Travel and experience a more crisp trigger pull. All In One Complete custom trigger job to reduce your KS7 trigger pull and reduce malfunctions.
KEL-TEC KS7 Resources:
If you're getting the KEL-TEC KS7 Trigger Spring Kit, then you might find the following KEL-TEC KS7 Resources useful in further enhancing your firearm. Download the KS7 Owners Manual or use the Exploded View of the KS7 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC KS7 Trigger Spring Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC KS7 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Definite improvement
After purchasing a KS7 the trigger was terrible. Out of the box it was pulling in excess of 10 plus pounds. Unacceptable. After returning it to Kel Tec it was returned with a pull in the 7 to 8 pounds with a note that was within spec. I have to say that triggers with this heavy of a pull, in my opinion is like working with a dull knife. A real safety issue. My goal was to get below 5lbs which is workable for shotgun. After watching Mcarbo's install video a couple times I went to it. What a pain getting it back together. I was warned. Anyway, after getting it back together it was just not working correctly. I felt some binding and the reset was not working consistently. After dismantle number two, I was still not happy with it and again the reset was not working correctly. Took it apart again and this time I did some polishing and spent a little more time ensuring everything was lining up during reassembly. I found that it worked best for me to deviate from the video in a couple areas, first I did not hold the hammer back and I inserted the inner return spring arm after fitting the sear in the fired position over the hammer bar. I got pretty good at this after my multiple attempts. The video was on a KSG which I would think would be the same but, my KS7 did have an extra screw and was a little different than the video. After my third attempt I ended up with about 4.75 lb. pull and a decent break. the reset works correctly, and the trigger action is much improved. overall. I will be putting it to the test over the next week so hopefully everything stays together. My experience is not an Mcarbo issue, and I appreciate that they offer a spring kit and video in an effort to improve my KS7.
Excellent addition
This spring kit makes the trigger nice and light, but not too light. Combined with the mcarbo trigger it is awesome. Install can be difficult getting everything in place and aligned to get the two halves of the grip assembly back together.
Great upgrade
The factory KS7 trigger pull leaves a lot to be desired. Don't know that it's an absolute necessity to upgrade this if it's just a home defense shotgun, but it's definitely a great addition which dramatically lessens the trigger pull and makes it a pleasure to shoot.
Nice upgrade. The tedious installation paid off
It's a nice upgrade to my KS7. I can feel the difference in lighter trigger pull. I wish I read the review prior to installation so I know I could reference to the KSG installation. Had a few springs flying here and there but managed to put them back together without the video.
Definitely lightens the trigger pull
This spring kit makes a big difference. I have been in a accident which left me with weak hands and this helps me enjoy my gun. I'm really grateful.
Trigger spring kit
Kel tec 9mm trigger is great. My trigger pull is smooth and half the pull it was.
KS7 Trigger Spring
Nice upgrade. Install is tedious. I added the springs and lightly stoned off the tooling marks on the sear engagement surfaces. Impressed with the final results. If I had to do it again, I might just pay MCARBO to do the install! Their step by step(KSG) trigger spring install video is a excellent reference.
Get the trigger too!
Great improvement over stock trigger pull.
Will this answer the trigger fit the KSG410?