KEL TEC SUB-2000 Mods

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Maintain the cleanliness of your barrel effortlessly with the 9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner by M*CARBO. This...

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Maintain the cleanliness of your barrel effortlessly with the 9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner by M*CARBO. This flexible cleaning device is meticulously designed to cleanse the bores of both pistol and rifle barrels, providing a solvent-safe solution that won’t deteriorate with the application of bore cleaner. Featuring a one-piece design, this bore snake integrates corrosive-resistant bronze brushes to...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging internal parts and components. We had them custom manufactured just for this application! Made in the USA!

RocksettRocksett by Flexbar has a Temperature rating of up to 1,500 degrees Fahrenheit, which far exceeds that of Red or Blue Loctite. Rocksett is the Industry Standard for Muzzle Brake...

RocksettRocksett by Flexbar has a Temperature rating of up to 1,500 degrees Fahrenheit, which far exceeds that of Red or Blue Loctite. Rocksett is the Industry Standard for Muzzle Brake Applications due to the temp rating and removable strength rating, similar to Blue Loctite. It's far superior to Red or Blue Loctite due to the massive 1,500 degree temperature rating, which is 3 times that of Loctite. Instructions for Using Rocksett: Rocksett is a ceramic cement (not a contact cement)....

1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to...

1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to fulfill the functional requirement of being crushed without cracking.Designed for the installation of AR-15 flash hiders, muzzle brakes, or compensators on barrels with 1/2x28 threading, this Crush Washer is compatible with every standard AR-15 on the market chambered in 5.56/.223. It is also suitable...