Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Installed spring kit, easy trigger pull, no miss fires.
Let me say first of all that this is a great product. It renders a great trigger pull. With the added polishing it really improves it. And let me also say that I have never and I mean never dealt with a company with faster shipping and better communication. I really appreciate that and won't hesitate to do business with MCARBO in the future
Enjoyable tinkering kit. Installed in 2 different .357 SP101's, the regular and the bobbed hammer versions. I HIGHLY recommend Kevin Wilson's "The Ruger SP101 Trigger Job Guide". I made a hard-copy and used this to guide me through the installation of both kits. A bit of a challenge courtesy of the springs being under pressure, but the results were worth it. I don't have a trigger pull gauge, but I can dry-fire either revolver a lot more at any one time before my hands cramp up. Sorry I can't offer hard numbers, but suffice to say both revolvers are a lot smoother an easier to use. This is an actual noticeable difference. Thanks very much, M*CARBO!!!!
Video step by step made installation easy . Different revolver after installing kit , Meprolite front sight , and Houge grip. Smooth as silk !
I bought a used SP101 in 327 Federal Magnum and was immediately disappointed with the trigger pull. MCarbo to the rescue, their trigger kit was just what I needed. Great video for guidance and a great improvement for this gun. I have used several MCarbo parts and all have exceeded expectations. Thank you for your commitment to excellence.
This product is a must have to fix the fit of Ruger triggers and hammers. I will purchase again without hesitation.
Reduced from 13lbs+ to 6lbs. Product worked as advertised, easy enough install.
This is the 1st review, that I have ever wrote. I expect the product to work. I will say that the kit work as expected. However what made this exceptional, was the video that you spend time on. The extra effort on showing the polishing and detail of the parts was great. I was worried about doing this. I did install the hammer dog backwards, even with you warning me about doing this. Just went back and watch the video again. Everything is now back,better than ever. Smooth as butter!
I Watched the M-Carbo video, Done some of the main items by polishing and sanding ruff edges, Installed the spring kit and re-assembled. Was very happy, I ended up with a 7lb double action trigger pull and a 2.5 pound single action pull. Very Happy.
I have had my SP 101 for over 20 years. I changed the springs years ago but the trigger was still not great. I saw the M*Carbo kit and watched the video and new this was what my SP 101 needed. I did the full polish job and changed the springs. The video made it easy. I also got the muzzle lapping kit and did the full package on the SP 101. What a difference in the trigger. The double action is fantastic. Thanks Chris for making a good gun great.
Done in 2021. Replaced spring & polished bearing surfaces. Took about 7 hours of work mainly because I was clumsy in disassembling and reassembling. but was eventually successful. Followed the online video instructions which were excellent. Reduced original DA trigger pull to 5.5-6.0 lb. Reduced SA trigger pull to 3.5 lb. Revolver is now much smoother and more accurate. Thanks, guys. Rangers lead the way!
Recently purchased this kit after watching the VERY detailed video that was available. The video influenced me to get the kit (wife's gun, brutish stock trigger pull). Arrived quickly and as described, highly satisfied. Not one to write reviews, but I was compelled , once again, by the video, which is one of the better pieces of work I've seen out there. Performance following the modification was as advertised and I recommend it. I also ordered the crown polishing kit to remove some small manufacturing marks and burrs and it also performed as advertised. Great product. On a side note, one thing I wasn't prepared for was the size of the parts involved. Chris's video is done under magnification, for clarity. In reality, these are some pretty small parts! I'm not mechanically challenged, so it wasn't a big deal, but be aware! This is no job to be performed with the 'Whiskey Shakes' LOL!....
My first trigger job on a revolver. I didn't measure the trigger pull prior to working on the trigger. The finished double action pull was > 8 lbs and off my gauge and the single action pull was 2.75 lbs. The trigger was better than it was previously. The istallation video was very good. The springs in the 22LR kit could have been lighter.
I am no gunsmith, but after watching the installation video I thought I could handle it. All needed parts were included. Instructions clear and concise, and process relatively straight forward. With the exception of losing the cylinder latch sprig and detent, and having to order replacements, went as well as I hoped. Trigger pull smooth and certainly lighter. Dont have a pull gauge, but am betting got reduction from 10-11 to around 5-6. Highly recommend the spring kit, polishing kit, and sandpaper. Ready to head to the range