Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Item was shipped extremely fast. Only problem was the slow (intentionally?) post office!! but no fault of MCarbo
Took me about 1 hour a little bit of frustration. However, overall went very smooth. I. Also changed out the recoil spring, I went and shot 100 rounds clearly a softening of the recoil. Which was always a problem with the Kimber micron. Accuracy improved dramatically with the softer trigger pull. Ps...first time I completely took apart any gun and it went great.
Installed this today and cut my groups almost in half. What a nice addition to a great pistol. Thans for the quick service.
Simple installation after watching the video. Absolutely no problems... And the result is so nice. Nice clean, crisp break at 50% of the original pull weight. Happy Happy
Recently bought 2 of Kimber trigger kits, one for my Micro 9 and one for my wife's 380 Micro. Watched the video several times for reference. Installation was very easy except for the sear spring was tricky to get aligned. After several hundred rounds the factory trigger was a little more than 7 lbs. and after installation it is slightly over 4 lbs. Definitely worth the money!! Both pistols are more comfortable for us to shoot and accuracy has improved by the lighter pull and crisp trigger.
This kit made my micro much easier for my wife to operate compared to the stock spring set. This kit is a must have to make the firearm work smoothly.
Researched and purchased the above spring kit. Watched the video which was a great help. Installed kit. Took it to my local gunsmith for trigger pull test. From stock 6lbs down to 4lbs. Honey smooth pull with good reset. Going to order for my Sig and Glock.
Very good product. Everything fit as if it had come from Kimber. Trigger pull is very sweet!
Super easy to install took me about 15 minutes. I started out at around 6.5 pounds after I was finished I measured again and was right around 4 pounds. I’m super excited for some range time. Awesome product good job guys. God bless and thank you.
Turned my average trigger into a great trigger. My wife is wanting a Kimber just like mine and this spring kit will be added first thing.
Product as advertised, communications great, video priceless. Trigger results are very acceptable, was hoping for a lighter pull yet. From 7,3 lbs down to 4.6 lbs. Installation, for me wasn't anywhere as easy as the video showed, I ended up re-installing the sear and ejector, then the main spring. Tricky, but it worked. Recommend? absolutely!
Dropped weight down to 4 lbs which fine for this little pocket pistol Nice kit easy to install
This was a simple install kit. and the results are fantastic. This is my wife's EDC gun and after I did my Hellcat and she shot that gun she had to have her Kimber done, great Kit MCARBO.
Took about 20 minutes to install, made an already nice shooting gun even nicer.
I found it easer to install the sear before the ejector, installed it using punch. It holds the spring back enough to make the ejector go in easy. Put pin in ejector and slowly pushed punch out.
Went from a 6.75 average trigger pull to a 4.25 trigger pull. Improvement of 2.5 pounds. The best part was the improvement of the smoothness. Nice even consistent pull. Highly recommend the product. Well worth the cost an easy installation