Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
I just finished installing the SCCY performance bundle on my CPX2. Trigger pull Before installation was, on 6 pulls the high was 9 lb 15.4 oz and the low was 8 lb 2 oz. (My gauge doesn't figure average pull). After installation on 6 pulls measured the high was 4 lb 6.2 oz and the low was 2 lb 1 oz. Have not had a chance to shoot it yet and test it on the range. The difference was amazing. I watched the video and found that some parts on my gun were different than the one in the video, such as the trigger bar was more like the one on the CPX 1, mine did not have a hole for the trigger return spring to hook to the end of the spring was held under the bar against the frame. Make sure you study your gun before taking it apart per the video, because SCCY seems to use different parts even on the same model and version. Also, I could not get the travel screws to work at all, no matter how I adjusted them and even used both the 3/16" screws, I could not get my trigger to reset even with the slide on, so I just left them off. The flat trigger is aluminum trigger is definitely still better than the plastic OEM one, and once I saw how it interfaces with the other parts, I'm glad I replaced it, as it looks like a possible failure spot on the trigger shaft with a plastic trigger. The video made it very easy to install the springs and trigger kit, and I highly recommend watching the whole videos first before working on your gun along with the video. For me it wasn't any harder than field striping my gun, just a few steps further.
Went from a royal PITA to a well shooting pistol. Not bad at all for an inexpensive pistol.
This cpx2 bundle really delivers!! Quality materials and the installation videos was very good in helping me install the parts. The trigger pull was cut in half! My wife really feels the difference. She is very happy as this is her EDC. Thank you guys so much!!
After trigger install I couldn’t get it to reset no matter how much I adjusted the trigger stops. Finally figured out that it would reset with the slide installed. I wish the video would have mentioned this. When I tested my pistol I noticed a considerable amount of trigger pull reduction. Maybe some muzzle flip reduction. Definitely a noticeable improvement.
this kit works great used on two sccy's and on both the trigger pull was so much better they both function well would recommend
DOES WORK ON A SCCY CPX-2 GEN 3 !! Had my gun smith install - Very happy with weight of trigger now! :)
Nice addition to my SCCY pistol and a well made upgrade
Received the kit within a week. Watched the video and started the installation. It probably took about an hour more or less. It was exactly as advertised.
To start I have to say I have never been a SCCY fan because of their notorious reputation for unreliability, however I have to say with the M*Carbo Performance bundle this gun is a pleasure to shoot and I have fired just over 500 rounds since installing the kit with 0 malfunctions. It has turned this gun into a great if not exceptional carry firearm be it a little light now on the trigger for the beginning shooter. Prior to the mod the trigger average pull was 7lbs. 5.6 ounces, after the mod the trigger pull is 2lbs. 4.2 ounces. the straight trigger feels so much better and with the adjustments the Trigger Pre travel is basically 0 and overtravel is at 0 the break is crystal. It's hard to believe it's the same gun. M*Carbo you should notify SCCY an incorporate your kit in their production and they would probably double their sales as well as make a lot of SCCY customers a lot less dissatisfied with their purchase.
Excellent product
I just finished installing a "performance bundle" (or some title like that) in my SCCY, CPX-2 a little while ago. Before I started the pistol had an 8 + pound trigger. That's as high as my gauge would go, so I figure it was higher. As usual the kit was easy to install, and the video instructions were great. The trigger has dropped to 6.5 pounds, which I consider outstanding for this gun. There was one problem however. Part of the kit was an aluminum flat faced trigger. I could not get that thing to work no matter what I did. It simply refused to reset. I went through the installiation three times. I tried the new trigger with the old spring. No good. Then I finally gave up and put the standard trigger and spring back in. That worked fine, so I sort of figured I wasn't doing anything in particular wrong. So I went back and reinstalled the stock trigger, but with the MCarbo trigger return spring. That was a winning combination. All the other springs in the kit went in without a problem. I hope to get it to the range in a day or so to see how it shoots. I don't fault MCarbo for the problem with the trigger. I'm sure I was missing something, and I intend to give it a try again once my patience has had a chance to rebuild. Now I need one for a CSX, and a 9mm EZ PC. :)
I purchased a bundled trigger kit (trigger springs, trigger and recoil spring). Everything was neatly packaged and labeled. Medium skill level to complete installation. Reduced trigger pull significantly after install. Good product and fast delivery time. Thanks for the excellent product.
Installed this kit in CPX-2 and now my trigger is 4 lb Couldn’t be happier. Trigger was perfect without overtravel/take up screws.
I was a little nervous taking the gun apart but I followed the video step by step and love the results. Don think you can’t when you can’t too! PS it’s totally worth it!
this spring kit comes with all the stuff you need to fix your sccy trigger.it was very quick to install and improved the trigger a lot, now you can shoot this more better!!
No accuracy improvement, no trigger improvement noted, don't waste your 79 dollars on it, waste of time and money.